Here you should see your audio device as shown in the image.

In the Device Manager, open the “ Sound, video and game controllers” group.

In Windows XP, open the Device Manager (open the Control Panel -> double-click the System icon -> in System Properties dialog box, select Hardware tab -> click Device Manager button).

If you are using a separate sound card, the onboard should be disabled of course! Instruction will vary per motherboard, so you need to follow the instructions in your PC or motherboard manual for this.

If you have an onboard audio card, you need to make sure the onboard audio device is enabled in the Bios.

The best approach is to go through the steps below and check each aspect. In all cases, it could be an audio configuration problem, but often it is a driver problem.

the sound only works on a headset and not on the (monitor) speakers.

the sound is not working for internet pages.

It is also possible that there is no error, but:

The drivers for this device are not installed.Windows Media Player cannot play the file.No wave device that can play files in the current format is installed.Your audio hardware cannot play files like the current file.Typical examples of sound errors in Windows XP are: The media player you are using can give an error, or you can check the Device Manager and see an error on the audio device. In some cases, you will see a concrete error that can help you fix the sound problem in Windows XP. Troubleshoot Sound Problems in Windows XP – Sound Errors Troubleshoot Sound Problems in Windows XP – Sound Errors.Refer to the motherboard or computer's documentation to determine if your computer is set up this way. Some motherboards do not have an onboard speaker and instead use a computer case speaker that can be removed to disable the speaker. Refer to the motherboard's documentation to determine if your motherboard has such a jumper, and how it should be set. Many motherboard manufacturers have jumpers that, when jumped or not jumped, enable or disable the onboard speaker.Īll motherboards are different. If the steps above don't disable the internal speaker (i.e., there's no Non plug and play Drivers section), the internal speaker can be disabled by the motherboard jumpers. If you want to permanently disable this device, under the Startup type, select Disabled. On the Driver tab, if you want to temporarily disable this device, click the Stop button.In the Beep properties window, click the Driver tab.If you do not see a Non plug and play Drivers section in the Device Manager, skip to the Motherboard jumper section below.

How to enable sound on windows xp